UNIVERSAL FLOOR MASTER EPOXY FOOD GRADE TOPCOAT
UNIVERSAL FLOOR MASTER EPOXY FOOD GRADE TOPCOAT is a two-component solvent base industrial grade epoxy topcoat designed for food grade manufacturing applications and tank linings. Is a topcoat designed for the Universal Floor Master Epoxy Food Grade system.
· Food Grade
· Durable against light abrasion
· Chemical resistant
Best for:
Concrete and metal
Sheen: Gloss
Coverage: 20-25 sqm/gal
Available sizes: 4liters
Application: by brush or roller
Reducer: Univ Non-toxic Epoxy reducer
Mixing Ratio 3:1
Part A – 3 parts
Part B -- 1 part
Mix well and allow 15 minutes induction time
Universal Floor Master Epoxy Food Grade System
Primer - UFM Epoxy Food Grade Primer
Topcoat - UFM Epoxy Food Grade Topcoat
Reducer - UFM Epoxy Food Grade Reducer
Painting Guide:
Concrete
New or unpainted surface
· Remove dirt, dust, grit, loose mortar, oil, grease, and other contaminants. New concrete must be cured at least 28 days or at manufacturers recommendation.
· Wipe clean the surface before paint application
Old or previously painted surface
· Remove all loose, peeling, chalking or blistering paint, dirt, dust, grease, oil, and other contaminants.
· Treat mold or fungus infestation with bleaching solution (1 part bleach and 3 parts water)
· Wipe clean the surface before paint application
Metal
New or unpainted surface
· Ensure that the metal surface is free from oil, grease, rust and, other surface contaminants.
· Remove thin rust by wire brush, sanding or scraping. Use Professional Rust Converter for thick rust.
· Wipe clean the surface before paint application
Old or previously painted surface
· Remove all loose, peeling, chalking or blistering paint, dirt, dust, grease, oil, and other contaminants by wire brushing or scraping.
· Wipe clean the surface before paint application
Application:
Concrete
· 1st coat - Universal Floor Master Deep Penetrating Sealer.
· Allow 4 hours drying time.
· 2nd coat – Universal Floor Master Epoxy Food Grade Primer.
· Allow 4 hours drying time.
· 3rd – 4th – Universal Floor Master Epoxy Food Grade Topcoat.
· Allow 8 hours intercoat interval.
Metal
· 1st coat - Universal Floor Master Epoxy Food Grade Primer.
· Allow 4 hours drying time.
· 2nd – 3rd – Universal Floor Master Epoxy Food Grade Topcoat.
· Allow 8 hours intercoat interval.
Product Tools