UNIVERSAL FLOOR MASTER EPOXY FLOOR COATING PRIMER is a two-component surface preparation product, solvent base protective primer  for concrete floor.  Works well with new or old concrete floors.  Is a base coat for the Universal Floor Master Epoxy Floor Coating system.

·         Superior Adhesion

·         Seals Surface

·         High coverage

·         Excellent chemical resistant

Best for:
Concrete floors

Sheen: Flat

Coverage: 20-25 sqm/gal

Available sizes: 4 liters

Application: by roller or brush

Mixing Ratio 3:1 by volume

Part A – 3 parts

Part B -- 1 part

Mix well and allow 15 minutes induction time

Universal Floor Master Epoxy Floor Coating System

Primer - Universal Floor Master Epoxy Floor Coating Primer

Topcoat - Universal Floor Master Epoxy Floor Coating Topcoat

Painting Guide:

Concrete

New or unpainted surface

·         Remove dirt, dust, grit, loose mortar, oil, grease, and other contaminants.  New concrete must be cured at least 28 days or at manufacturers recommendation before paint application.

·         Wipe clean the surface before paint application

Old or previously painted surface

·         Remove all loose, peeling, chalking or blistering paint, dirt, dust, grease, oil, and other contaminants. 

·         Treat mold or fungus infestation with bleaching solution (1 part bleach and 3 parts water)

·         Wipe clean the surface before paint application

Application:

·         1st coat - Universal Floor Master Deep Penetrating Sealer.

·         Allow 4 hours drying time

·         2nd coat – Universal Floor Master Epoxy Floor Coating Primer.

·         Allow 4 hours drying time then sand.

·         3rd – 4th coat - Universal Floor Master Epoxy Floor Coating Topcoat of desired color.

·         Allow 8 hours intercoat interval.

Tip:  Use Universal Floor Master Epoxy Floor Coating Reducer for thinning.