UNIVERSAL FLOOR MASTER EPOXY SELF-LEVELING PRIMER is a two-component industrial grade primer of the Universal Floor Master Self-Leveling system.  Apply this primer to even out uneven surfaces.  Works well with new or old concrete floors.

·         Self-Leveling

·         Solventless composition

·         Chemical resistant

·         High adhesion

·         Low VOC

·         Quick curing

·         Seamless finish

·         High Gloss finish

Best for:
Concrete floors

Sheen: High Gloss

Coverage: 10-12 sqm/gal

Available sizes: 4 liters

Application: by trowel brush or roller

Do not reduce

Mixing Ratio 2:1

Part A – 2 parts

Part B -- 1 part

Mix and apply immediately.

Potlife- 20 minutes

No induction time

Universal Floor Master Epoxy Self-Leveling System

Primer - UFM Epoxy Self-Leveling Primer

Topcoat - UFM Epoxy Self-Leveling Topcoat

Painting Guide:

Concrete

New or unpainted surface

·         Remove dirt, dust, grit, loose mortar, oil, grease, and other contaminants.  New concrete must be cured at least 28 days or at manufacturers recommendation before paint application.

·         Wipe clean the surface before paint application

Old or previously painted surface

·         Remove all loose, peeling, chalking or blistering paint, dirt, dust, grease, oil, and other contaminants. 

·         Treat mold or fungus infestation with bleaching solution (1 part bleach and 3 parts water)

·         Wipe clean the surface before paint application

Application:

·         1st coat - Universal Floor Master Self-Leveling Epoxy Primer.

·         Allow overnight to dry.

·         2nd coat – Universal Floor Master Self-Leveling Epoxy Topcoat of desired color.

·         Allow 48 hours to dry for pedestrian traffic. 

·         Allow 3-4 days maximum cure for vehicular traffic.